-
11kv Pin Type Insulator Normal N95-4
Pin Type Porcelain Insulators Type N95-4 Dimensions Main dimensions D mm 130 H mm 152 D1 mm 80 d min mm 100 d1 min mm 25.4 b mm 51 R mm 14 Leakage distance mm 318 Mechanical Values Minimum breaking load kN 13.6 One minute withstand voltage wet kV 50 Power Frequency Voltage Dry kV 80 Wet kV 55 Critical impulse flashover Pos kV 130 Neg kV 150 Puncture Voltage kV 115 Packing and Shipping Data Net weight,approximate kg 2.85 -
11kn AS Standard PW-15-A Pin Type Porcelain Insulator
Pin type common ceramic insulator porcelain parts and cast steel are glued together with cement adhesive, and the surface of the porcelain parts is coated with a layer of glaze to improve the insulation performance of the insulator. A moisture-proof agent is applied to the surface of the adhesive where the cast steel and porcelain are cemented. -
11kn AS Standard P-11-A Pin Type Porcelain Insulator SLP/11/180
Video Drawing Parameter table AS standard pin type insulator Class AS P-11-A Dimensions Main Dimensions H mm 107 h mm 40 D mm 140 d mm 76 R1 mm 16 R2 mm 13 Creepage Distance mm 180 Mechanical Values Cantilever Failing Load kN 11 Electrical Values Nominal Voltage kV 11 Minimum Flashover Voltage Power frequency Dry kV 60 Wet kV 32 50% Critical Impulse (peak) kV 95 Power-frequency Puncture Voltage kV 95 Packing and Shipping Data Weight kg 1.3 -
Hot dip galvanized steel Electric Power Fitting
Iron or aluminum metal accessories widely used in power transmission lines are collectively referred to as fittings. Most fittings need to bear large tension during operation, and some also need to ensure good electrical contact
jackwu@johnsonelectricchina.com -
Spool Insulators
An insulator that is used in distribution networks that works with low voltage is known as a shackle insulator. This insulator is also known as a spool insulator. These insulators can be worked in two positions like horizontal otherwise vertical. At present, the usage of this insulator has decreased because of the underground cable used in distribution purposes.
The spool insulator is equipped with more than two umbrella buildings. The conductor is bound in the middle of the upper and lower umbrella buildings, and the center is perforated. It is fixedly connected to the cross arm or splint with threading nails -
ED-2C Low Voltage Porcelain Ceramic Shackle Insulator
Shackle insulator is suitable for overhead transmission and distribution line terminal, and fixed on tension rod or angle pole to supporting conductors and playing a role in insulating.
As one part of electrical fitting strings, porcelain shackle insulator is used in order to simplify the fitting structure. It is normally used in 400V lines.
It is a type of low voltage insulator usually assembled with upset bolts, secondary racks, or secondary clevises to provide insulation for the conductors on the pole.
The shackle insulator includes a conductor within the groove and it is fixed by using a soft binding wire. They are typically installed horizontally or vertically on low voltage transmission lines.
Most of them are made of porcelain, but some are made of polymer. -
ED-2B Low Voltage Porcelain/Ceramic Shackle Insulator
Low voltage line insulators are used for insulation and fixing of power line conductors with power frequency AC or DC voltage below 1KV. There are mainly needle type, screw type, spool type, tension and tram line insulator, etc. Butterfly and spool insulators can also be used for insulation and fixation of conductors on low-voltage line terminals, tension and corner rods. Tension insulator is used for insulation and connection of pole stay wire or tension conductor.
Insulators are widely used devices, and their connecting fittings are also required to be interchangeable. In addition, the technical standards of butterfly insulators also require various electrical, mechanical, physical and environmental condition change tests on insulators according to different models and service conditions, as well as environmental condition change tests, so as to test their performance and quality. -
BS 1618 Shackle Electrical Porcelain Insulators for Low Voltage
It is used for insulation and fixed conductor in overhead power lines with DC or power frequency AC rated voltage lower than 1000V. According to its structural type, it is divided into low-voltage pin insulator, low-voltage butterfly insulator and low-voltage spool insulator. The ambient temperature of the installation site is - 40 ℃ ~ + 40 ℃, and the altitude shall not exceed 1000m.
jackwu@johnsonelectricchina.com -
BS 1617 Shackle Electrical Porcelain Insulators for Low Voltage
This Low price porcelain shackle insulator is used for low voltage .shackle and spool insulators can be used for insulation and fixation of conductors on low-voltage line terminals, tension and corner rods. Tension insulator is used for insulation and connection of pole stay wire or tension conductor.
Insulators are widely used devices, and their connecting fittings are also required to be interchangeable. In addition, the technical standards of butterfly insulators also require various electrical, mechanical, physical and environmental condition change tests on insulators according to different models and service conditions, as well as environmental condition change tests, so as to test their performance and quality. -
High voltage outdoor 11kv Composite Polymer Line Post Insulator
Good anti-aging performance: after ten years of practical testing, it is shown that the composite insulator has no change in surface non-wetting and electrical corrosion resistance, except that the color is slightly darker and the dielectric constant and the dielectric loss Angle are slightly increased, indicating that the anti-aging performance is good. -
High Tension Silicon Rubber composite 11kv composite insulator
Polymer Pin Insulator Product Parameter Type Rated voltage Specifified bending load Section length Min Arcdistance Leakage distance Lightning impulse withstand BIL Power frequency withstand (wet) (kV) (kN) (mm) (mm) (mm) (kV) (kV) FPQ-11/4 11 4 285 205 450 105 45 FPQ-11/5 11 5 300 220 480 105 45 FPQ-11/5 11 5 245 177 426 105 45 FPQ-11/10 11 10 276 191 525 105 45 FPQ-15/10 15 10 280 160 660 145 65 FPQ-24/8 24 8 260 180 770 185 80 FPQ-33/10 33 10 335 250 740 185 ... -
70kn Fxb1-1570CT Power Line Electrical Composite Polymer Insulator
70kn Fxb1-15/70CT Power Line ElectricalComposite Polymer Insulator