-
Изолятор опорный ИО-10-3.75 У3
Изолятор опорный ИО-10-3.75 У3 предназначен для изоляции и механического крепления токоведущих частей в электрических аппаратах и для монтажа токоведущих шин распределительных устройств электрических станций и подстанций номинальным напряжением 10 кВ и применяется внутри помещения. -
11kV Drop-out Fuse Bushing RW11-10/100A
Drop-out fuse cutout and load switching fuse cutout are of outdoor used high voltage protective device,Tobe connected with incomin-g feeder of distribution transformer or distribution lines,it mainly protect transformer or lines from short circuit and overload,and on/off loading,current,Drop-out fuse cutout is composed of insulate insulator supports and fuse tube,static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube,Fuse tube is composed of inside arcexting tube.Outer phenolic compound paper tube or epoxy glasstube,Load switching fuse cutout provides enfored elastic auxiliry contacts and arc-extinguishing exclosure switching on-off loading current. -
-
24kV outdoor Ceramic post isolators ISWN 4-24 Russian type
24kV outdoor circuit breaker is an insulator used in outdoor power systems.
Its model is Iswn 4-24.
This type of insulator has a rated voltage of 24 kV and is suitable for outdoor power systems.
-
Ipu-10/630A-7.5 Uhl1 (oval flange) wall bushing Porcelain isolators
Insulator IPU-10/630-7.5 UHL1 (oval flange) is designed for the installation and insulation of conductive components in enclosed distribution devices and complete distribution devices in electrical stations and substations, and for the connection with open distribution devices or transmission lines with frequencies up to 10kV and 100Hz, Suitable for Type I or II atmospheres and enclosed diversion as specified in GOST 15150-69.
IPU-10/630-7.5 UHL1 insulators are typically used for maintenance and matching of KTP substations with capacities up to 100, 160, 200, 300, 400, and 630 kVA. -
Изолятор ИПУ-10/630-7,5 УХЛ1 (овальный фланец)
Изолятор ИПУ-10/630-7,5 УХЛ1 (овальный фланец) предназначен для проведения и изоляции токоведущих частей закрытых распределительных устройств электрических станций и подстанций, комплектных распределительных устройств, соединения с открытыми распределительными устройствами или линиями электропередачи на переменное напряжение 10 кВ частоты до 100 Гц, для работы в атмосфере типов I или II по ГОСТ 15150-69, атакже для закрытых токопроводов.
Изолятор ИПУ-10/630-7,5 УХЛ1, как правило применяется для ремонта и комплектации трансформаторных подстанций КТП мощностью до 100, 160, 200, 300, 400, 630 кВа. -
24kv Polymer Fuse Cut-out 200A
Drop-out fuse cutout and load switching fuse cutout are of outdoor used high voltage protective device,Tobe connected with incomin-g feeder of distribution transformer or distribution lines,it mainly protect transformer or lines from short circuit and overload,and on/off loading,current,Drop-out fuse cutout is composed of insulate insulator supports and fuse tube,static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube,Fuse tube is composed of inside arcexting tube.Outer phenolic compound paper tube or epoxy glasstube,Load switching fuse cutout provides enfored elastic auxiliry contacts and arc-extinguishing exclosure switching on-off loading current. -
High voltage porcelain line post insulator TR202 porcelain post insulator
ANSI Standard TR202 Glazed Power Porcelain Ceramic Station Post Insulator
-
Russia Type C4-80 II 10kv Porcelain Post Insulator
Russia type 10KV C4-80 II porcelain post insulator
Lightning impulse withstand voltage 10 kV
Creepage distance 320 mm
Failing load, bending 4 kN
Metal accessories : Nodular Cast Iron, or Aluminum -
C4-80 post Ceramic isolator
Technical Requirement:
1. Creepage distance:300mm
2.Cantilever strength:4kN
3.Torsion strength:100N.m
4.Standard:IEC60273 -
40kn New Great Quality IEC Standard Glass Insulator u40b
Glass insulator not only have a delicate appearance and stable quality, but also support high voltage transmission lines.
A suspension string can be made suitable for any voltage level.
-
24kV outdoor post insulator ISWN 4-24
24kV outdoor circuit breaker is an insulator used in outdoor power systems. Its model is Iswn 4-24. This type of insulator has a rated voltage of 24 kV and is suitable for outdoor power systems.