-
16kn BS16 ED-2B Low Voltage Ceramic Shackle Insulator
90*75mm low voltage Ceramic electronic components BS ED-2B porcelain shackle insulators
are used at the end of distribution lines or at sharp turns where there is excessive tensile load on the lines. These insulators can be mounted either in the vertical or horizontal position.
Insulators are widely used devices, and their connecting fittings are also required to be interchangeable. In addition, the technical standards of butterfly insulators also require various electrical, mechanical, physical and environmental condition change tests on insulators according to different models and service conditions, as well as environmental condition change tests, so as to test their performance and quality. -
BS 1617 shackle insulator
Electrical Porcelain Insulator 1617 with D-Iron are used at the end of distribution lines or at sharp turns where there is excessive tensile load on the lines. These insulators can be mounted either in the vertical or horizontal position.
Insulators are widely used devices, and their connecting fittings are also required to be interchangeable. In addition, the technical standards of butterfly insulators also require various electrical, mechanical, physical and environmental condition change tests on insulators according to different models and service conditions, as well as environmental condition change tests, so as to test their performance and quality. -
11kV Drop-out Fuse Bushing RW11-10/100A
Drop-out fuse cutout and load switching fuse cutout are of outdoor used high voltage protective device,Tobe connected with incomin-g feeder of distribution transformer or distribution lines,it mainly protect transformer or lines from short circuit and overload,and on/off loading,current,Drop-out fuse cutout is composed of insulate insulator supports and fuse tube,static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube,Fuse tube is composed of inside arcexting tube.Outer phenolic compound paper tube or epoxy glasstube,Load switching fuse cutout provides enfored elastic auxiliry contacts and arc-extinguishing exclosure switching on-off loading current. -
-
Ipu-10/630A-7.5 Uhl1 (oval flange) wall bushing Porcelain isolators
Insulator IPU-10/630-7.5 UHL1 (oval flange) is designed for the installation and insulation of conductive components in enclosed distribution devices and complete distribution devices in electrical stations and substations, and for the connection with open distribution devices or transmission lines with frequencies up to 10kV and 100Hz, Suitable for Type I or II atmospheres and enclosed diversion as specified in GOST 15150-69.
IPU-10/630-7.5 UHL1 insulators are typically used for maintenance and matching of KTP substations with capacities up to 100, 160, 200, 300, 400, and 630 kVA. -
Изолятор ИПУ-10/630-7,5 УХЛ1 (овальный фланец)
Изолятор ИПУ-10/630-7,5 УХЛ1 (овальный фланец) предназначен для проведения и изоляции токоведущих частей закрытых распределительных устройств электрических станций и подстанций, комплектных распределительных устройств, соединения с открытыми распределительными устройствами или линиями электропередачи на переменное напряжение 10 кВ частоты до 100 Гц, для работы в атмосфере типов I или II по ГОСТ 15150-69, атакже для закрытых токопроводов.
Изолятор ИПУ-10/630-7,5 УХЛ1, как правило применяется для ремонта и комплектации трансформаторных подстанций КТП мощностью до 100, 160, 200, 300, 400, 630 кВа. -
24kv Polymer Fuse Cut-out 200A
Drop-out fuse cutout and load switching fuse cutout are of outdoor used high voltage protective device,Tobe connected with incomin-g feeder of distribution transformer or distribution lines,it mainly protect transformer or lines from short circuit and overload,and on/off loading,current,Drop-out fuse cutout is composed of insulate insulator supports and fuse tube,static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube,Fuse tube is composed of inside arcexting tube.Outer phenolic compound paper tube or epoxy glasstube,Load switching fuse cutout provides enfored elastic auxiliry contacts and arc-extinguishing exclosure switching on-off loading current. -
C4-80 post Ceramic isolator
Technical Requirement:
1. Creepage distance:300mm
2.Cantilever strength:4kN
3.Torsion strength:100N.m
4.Standard:IEC60273 -
40kn New Great Quality IEC Standard Glass Insulator u40b
Glass insulator not only have a delicate appearance and stable quality, but also support high voltage transmission lines.
A suspension string can be made suitable for any voltage level.
-
24kV outdoor post insulator ISWN 4-24
24kV outdoor circuit breaker is an insulator used in outdoor power systems. Its model is Iswn 4-24. This type of insulator has a rated voltage of 24 kV and is suitable for outdoor power systems. -
11kV polymer fuse cut-out 200A composite bushing
IEC/ANSI/AS Applicable standard 11kv bushing insulator for fuses
These bushings are also able to withstand different elements like rain, excessive sunlight, moisture and also adhere to international quality standards. Here, our expertise lies in making these transformer bushings available with single as well as solid aluminum alloy conductor. -
Low voltage ceramic isolator N95-3 pin porcelain insulator isolators
Medium Voltage Overhead Ceramic Pin Insulator N95-3
Widely used on high voltage overhead lines, can easily handle and manufacture and be mounted as necessary, vertically or horizontally.