English

Porcelain Insulators

  • 24kV outdoor Ceramic post isolators ISWN 4-24 Russian type

    24kV outdoor Ceramic post isolators ISWN 4-24 Russian type

    24kV outdoor circuit breaker is an insulator used in outdoor power systems.
    Its model is Iswn 4-24.
    This type of insulator has a rated voltage of 24 kV and is suitable for outdoor power systems.
    inquirydetail
  • Ipu-10/630A-7.5 Uhl1 (oval flange) wall bushing Porcelain isolators

    Ipu-10/630A-7.5 Uhl1 (oval flange) wall bushing Porcelain isolators

    Insulator IPU-10/630-7.5 UHL1 (oval flange) is designed for the installation and insulation of conductive components in enclosed distribution devices and complete distribution devices in electrical stations and substations, and for the connection with open distribution devices or transmission lines with frequencies up to 10kV and 100Hz, Suitable for Type I or II atmospheres and enclosed diversion as specified in GOST 15150-69.

    IPU-10/630-7.5 UHL1 insulators are typically used for maintenance and matching of KTP substations with capacities up to 100, 160, 200, 300, 400, and 630 kVA.
    inquirydetail
  • Изолятор ИПУ-10/630-7,5 УХЛ1 (овальный фланец)

    Изолятор ИПУ-10/630-7,5 УХЛ1 (овальный фланец)

    Изолятор ИПУ-10/630-7,5 УХЛ1 (овальный фланец) предназначен для проведения и изоляции токоведущих частей закрытых распределительных устройств электрических станций и подстанций, комплектных распределительных устройств, соединения с открытыми распределительными устройствами или линиями электропередачи на переменное напряжение 10 кВ частоты до 100 Гц, для работы в атмосфере типов I или II по ГОСТ 15150-69, атакже для закрытых токопроводов.

    Изолятор ИПУ-10/630-7,5 УХЛ1, как правило применяется для ремонта и комплектации трансформаторных подстанций КТП мощностью до 100, 160, 200, 300, 400, 630 кВа.
    inquirydetail
  • 24kv Polymer Fuse Cut-out 200A

    24kv Polymer Fuse Cut-out 200A

    Drop-out fuse cutout and load switching fuse cutout are of outdoor used high voltage protective device,Tobe connected with incomin-g feeder of distribution transformer or distribution lines,it mainly protect transformer or lines from short circuit and overload,and on/off loading,current,Drop-out fuse cutout is composed of insulate insulator supports and fuse tube,static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube,Fuse tube is composed of inside arcexting tube.Outer phenolic compound paper tube or epoxy glasstube,Load switching fuse cutout provides enfored elastic auxiliry contacts and arc-extinguishing exclosure switching on-off loading current.
    inquirydetail
  • High voltage porcelain line post insulator TR202 porcelain post insulator

    High voltage porcelain line post insulator TR202 porcelain post insulator

    ANSI Standard TR202 Glazed Power Porcelain Ceramic Station Post Insulator
    inquirydetail
  • Russia Type C4-80 II 10kv Porcelain Post Insulator

    Russia Type C4-80 II 10kv Porcelain Post Insulator

    Russia type 10KV C4-80 II porcelain post insulator
    Lightning impulse withstand voltage 10 kV
    Creepage distance 320 mm
    Failing load, bending 4 kN
    Metal accessories : Nodular Cast Iron, or Aluminum
    inquirydetail
  • C4-80 post Ceramic isolator

    C4-80 post Ceramic isolator

    Technical Requirement:
    1. Creepage distance:300mm
    2.Cantilever strength:4kN
    3.Torsion strength:100N.m
    4.Standard:IEC60273
    inquirydetail
  • 24kV outdoor post insulator ISWN 4-24

    24kV outdoor post insulator ISWN 4-24

    24kV outdoor circuit breaker is an insulator used in outdoor power systems. Its model is Iswn 4-24. This type of insulator has a rated voltage of 24 kV and is suitable for outdoor power systems.
    inquirydetail
  • 11kV polymer fuse cut-out 200A composite bushing

    11kV polymer fuse cut-out 200A composite bushing

    IEC/ANSI/AS Applicable standard 11kv bushing insulator for fuses
    These bushings are also able to withstand different elements like rain, excessive sunlight, moisture and also adhere to international quality standards. Here, our expertise lies in making these transformer bushings available with single as well as solid aluminum alloy conductor.
    inquirydetail
  • Low voltage ceramic isolator N95-3 pin porcelain insulator isolators

    Low voltage ceramic isolator N95-3 pin porcelain insulator isolators

    Medium Voltage Overhead Ceramic Pin Insulator N95-3
    Widely used on high voltage overhead lines, can easily handle and manufacture and be mounted as necessary, vertically or horizontally.

    inquirydetail
  • HV porcelain pin insulator of SHF20G type

    HV porcelain pin insulator of SHF20G type

    SF-20UO PIN CERAMIC INSULATOR
    #SHF-20UO
    #PIN CERAMIC INSULATOR
    Производитель изоляторов штыревых фарфоровых ШФ-20 Г
    # ШФ-20 Г PIN CERAMIC INSULATOR SHF20GS
    #ШФ-20 Г
    ШП-20 PIN CERAMIC INSULATOR SHF20G1S
    #Штыревой полимерный со втулкой
    #ШП-20
    #PIN CERAMIC INSULATOR SHF20G1S
    SHF20G1S Штыревой полимерный со втулкой ШП-20
    inquirydetail
  • ZS-600 Pin Post Ceramic isolators

    ZS-600 Pin Post Ceramic isolators

    Technical requirement:

    1.Creepage distance:600mm

    2.Rated E&M failing load:13kN

    3.Lightningimpulse withstand voltage:125kV

    4.Power frequency DRY withstand voltage:75kV

    5.Power frequency WET withstand voltage:55kV

    6.Power frequency breakdown voltage:160kV

    7.Rated voltage:24kV

    8.AccordingtolEC60383-1:1993
    inquirydetail
<< < Previous 123456 Next > >> Page 3 / 28