Factory making 35kv Pin Post Insulator - 11kn AS Standard PW-22-A Pin Type Porcelain Insulator – Johnson
Factory making 35kv Pin Post Insulator - 11kn AS Standard PW-22-A Pin Type Porcelain Insulator – Johnson Detail:
Pin type porcelain insulators | ||||||||||||
Fig No. | 1 | 1 | 2 | 3 | 6 | 3 | 4 | 5 | 5 | |||
BS Class | P-11-Y | P-15-Y | P-22-Y | P-33-Y | P-35-Y | P-44-Y | PW-15-Y | PW-22-Y | PW-33-Y | |||
Creepage distance | 240 | 298 | 432 | 630 | 864 | 432 | 673 | 851 | ||||
Dry arcing distance | 102 | 133 | 200 | 360 | 399 | 483 | 197 | 267 | 419 | |||
Main dimensions | H | mm | 133 | 137 | 165 | 244 | 270 | 318 | 185 | 255 | 320 | |
h | mm | 48 | 48 | 52.6 | 52.6 | 52.6 | 52.6 | 52.6 | 52.6 | 52.6 | ||
D | mm | 140 | 152 | 229 | 280 | 270 | 343 | 170 | 205 | 240 | ||
d | mm | 18.3 | 18.3 | 27.8 | 27.8 | 27.8 | 27.8 | 27.8 | 27.8 | 27.8 | ||
R1 | mm | 13 | 13 | 19 | 19 | 14 | 19 | 16 | 16 | 16 | ||
R2 | mm | 9.5 | 11 | 14.3 | 13 | 14 | 14.3 | 16 | 16 | 16 | ||
Cantilever Strength | KN | 11 | 11 | 11 | 13 | 13 | 13 | 11 | 11 | 13 | ||
Min Flashover Voltage | Power frequency | Dry | kV | 75 | 80 | 100 | 135 | 140 | 155 | 100 | 125 | 140 |
Wet | kV | 50 | 55 | 60 | 95 | 100 | 110 | 65 | 95 | 110 | ||
Critical impulse | Pos | kV | 115 | 130 | 160 | 180 | 215 | 240 | 150 | 190 | 210 | |
Neg | kV | 150 | 175 | 205 | 290 | 295 | 305 | 190 | 235 | 245 | ||
Withstand voltage | One min Power Frequency | Dry | kV | 65 | 70 | 90 | 110 | 115 | 125 | 90 | 110 | 125 |
Wet | kV | 40 | 50 | 55 | 75 | 85 | 100 | 60 | 90 | 100 | ||
Withstand volt.impulse | kV | 90 | 110 | 150 | 170 | 190 | 200 | 140 | 180 | 200 | ||
RIV Data | Test volt. TO ground | kV | 15 | 15 | 22 | 30 | 35 | 44 | 22 | 30 | 44 | |
Max RIV at 1000 KHz | uV | 8000 | 8000 | 12000 | 16000 | 18000 | 25000 | 12000 | 16000 | 25000 | ||
Power Frequency Puncture Voltage | kV | 150 | 150 | 200 | 210 | 230 | 250 | 150 | 200 | 210 | ||
Approx.Weight | kg | 1.8 | 2 | 5 | 11 | 12.5 | 14 | 4.7 | 9.1 | 12.5 |
Type of pin insulator
1. Ordinary pin type insulator
Pin type common ceramic insulator porcelain parts and cast steel are glued together with cement adhesive, and the surface of the porcelain parts is coated with a layer of glaze to improve the insulation performance of the insulator. A moisture-proof agent is applied to the surface of the adhesive where the cast steel and porcelain are cemented.
The main reason why the overhead line is prone to lightning strike and dirty flashover is that the pin insulator of the line is polluted and moisture absorption in rainy days, and the insulation level is reduced, so that the pollution flashover and breakdown cause the line failure.
Needle type common ceramic insulators can continue to operate sometimes in clear weather after cracks or severe bruisings occur; But encounter light rain, fog weather, insulation on a sudden drop, causing line failure.
In addition, when the needle type common ceramic insulator has a slight crack, it is difficult for line inspectors to find the defect even with their hand telescopes, which leaves a safety hazard for the line and increases the unsafe factor of the line operation.
2. Lightning protection pin type insulator
The patented puncture structure can penetrate the insulation layer of the wire installed in the slot to form an electrical connection; The unique ignition arc fork is closely connected with the upper end of the insulator through a bolt, and the other end is a discharge end, forming a discharge gap with the grounding electrode installed on the lower end of the insulator. And an insulation cover wraps all exposed parts of the upper end of the insulator except the arc fork discharge end.
Under normal conditions, the discharge gap of the surge insulator does not operate; Only when the lightning overvoltage exceeds the specified, the gap between the arc fork and the grounding electrode can be broken down, forming a short circuit channel. The connected power frequency arc will burn on the arc fork of the line clip, releasing the overvoltage energy to protect the wire from burns.
Product detail pictures:
Related Product Guide:
We're committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for Factory making 35kv Pin Post Insulator - 11kn AS Standard PW-22-A Pin Type Porcelain Insulator – Johnson, The product will supply to all over the world, such as: New Orleans, Sao Paulo, Johor, Our solutions have national accreditation requirements for qualified, good quality products, affordable value, was welcomed by individuals all over the world. Our products will continue to improve inside the order and appear forward to cooperation with you, Definitely should any of those goods be of curiosity to you, be sure to letus know. We'll be satisfied to supply you a quotation up on receipt of the detailed needs.
By Priscilla from Romania - 2018.02.12 14:52
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By Maxine from kazan - 2018.11.02 11:11