-
-
RTV Silicone Post Insulator P-70 Coating Red Epoxy Resin
igh voltage indoor post insulators for power stations: used for indoor power stations and substations with rated power frequency voltage of 6-35kV on the bus and distribution devices of electrical equipment. An insulating support for a high voltage conducting part. It is generally installed at an altitude of no more than 1000m, the ambient temperature is -40 ~ 40℃, and should be used under the condition of free from pollution and condensation, the specially designed plateau type can be used at an altitude of 3000m and 5000m. -
P-70 Porcelain Post Insulator
Post insulator is a special insulation control which can play an important role in overhead transmission line. In the early years, pillar insulators were mostly used for telephone poles, which were gradually developed to hang a lot of suspension-like insulators at the end of the high-voltage wire connection tower to increase the creepage distance. They are usually made of silica gel or ceramic, and are called insulators. -
p70 p13 p80 Post Insulator for Normal Disconnector
Post insulator normal disconnector Type P-13 P-70 P-80 Dimension Diameter(D) mm 160 140 113 High(H) mm 380 254 310 Leakage distance (Creepage distance) mm 1000 500 400 Mechanical Values Cantilever strength kn 2.3 3.6 2.7 Electric Values Rated voltage kv 33 22 24 Full wave impulse flashover oltage kv 230 140 145 Wet power frequency flasho er voltage kv 95 70 70 Packing and Shipping Date Net weight kg 9.6 6.2 4.8 -
-
ANSI TR Series High Voltage Outdoor Station Post Ceramic Insulator
Performance 1.. Excellent pollution resistance. Insulator’s anti-pollution performance mainly depends on the structure of the product and the shape of the umbrella skirt. A lot of work has been done in this area. Through design optimization, artificial pollution test optimization and natural pollution test optimization, the insulator umbrella skirt with different sizes and edges under the umbrella was finally determined. The insulators with rated voltage 126kV and 252kV bending failure ... -
ANSI 57series Porcelain Line Post Insulator for Transmission
Line post type porcelain insulators ANSI Class 57-1 57-2 57-3 57-4 57-5 Dimensions Creepage distance mm 356 559 737 1015 1145 Dry arcing distance mm 165 241 311 368 438 Mechanical Values Cantilever strength kn 12.5 12.5 12.5 12.5 12.5 Cantilever strength routine test kn 5 5 5 5 5 Electrical Values Type application voltage kv 25 35 45 55 66 Low frequency dry flashover voltage kv 80 110 125 150 175 Low frequency wet flashover voltage kv 60 85 100 125 150 Critic... -
24kv 13kn Pin Post Insulator for High Voltage
24kv 13kn Pin Post Insulator for High Voltage
Standdard applied IEC 60383
Spacing mm 385
Rate voltage kV 24
Creepage distance mm 600 -
22kv 12.5kn Pin Post Insulator for High Voltage
22kv 12.5kn Pin Post Insulator for High Voltage
Cat.No QS11404
Class ANSI PIN POST
