Porcelain Insulators

  • Pin type porcelain insulator SHF20GS

    Pin type porcelain insulator SHF20GS

    Производитель изоляторов штыревых фарфоровых ШФ-20 Г
  • 22kv High Voltage Alp/22/450 Pin Type Porcelain Insulators

    22kv High Voltage Alp/22/450 Pin Type Porcelain Insulators

    22kv высоковольтный Alp / 22 / 450 игольчатый фарфоровый изолятор
  • Factory Price pin type porcelain isolators SHF20GS1

    Factory Price pin type porcelain isolators SHF20GS1

    There are three modifications of the insulator after the manner of its coupling:with the polyethylene capsule, with the composite material thread corresponding to the requirements of SFS (Finland) standard and BS (Great Britain) – a small head.
  • Porcelaln pin Insulator ShF20G

    Porcelaln pin Insulator ShF20G

    Производитель изоляторов штыревых фарфоровых ШФ-20 Г
  • 33Kv High Voltage Ceramic Electrical Porcelain Price Pin Type Support Insulator PW-33-Y

    33Kv High Voltage Ceramic Electrical Porcelain Price Pin Type Support Insulator PW-33-Y

    33kv P-33-Y pin porcelain insulator pot
    can be used on transmission and distribution lines for medium and high voltage made of porcelain materials.
  • SHF20G1 Ceramic Pin isolators with Stringing Sleeve

    SHF20G1 Ceramic Pin isolators with Stringing Sleeve

    Производитель изоляторов штыревых фарфоровых ШФ-20 Г
  • C4-125 Ceramic Solid Core Station Post isolators

    C4-125 Ceramic Solid Core Station Post isolators

    24kv post porcelain insulator is made of post insulator,called C4-125 post insulator,we applicate it in the 24kv power line switch gear. The body is the post insulator,the top and bottom fix with fitting.
  • ANSI54-2 high tension stay porcelain insulator

    ANSI54-2 high tension stay porcelain insulator

    Parameter Stay insulators ANSI Class 54-2
    Creepage distance 48mm
    Mechanical Values Cantilever strength 55kn
    Tension insulator is used for power frequency AC or DC overhead power lines, pole stay wire or tension conductor and insulation. The ambient temperature of the installation site is - 40 ℃ ~ + 40 ℃, and the altitude is no more than 1000m.
  • ANSI 54-2 Porcelain Guy Strain Stay Insulator

    ANSI 54-2 Porcelain Guy Strain Stay Insulator

    The Stay porcelain insulators transmission line insulators is used for high voltage.
  • 33Kv High Voltage Ceramic Electrical Porcelain Price Pin Type Support Insulator PW-33-Y

    33Kv High Voltage Ceramic Electrical Porcelain Price Pin Type Support Insulator PW-33-Y

    Video Drawing Parameter table Pin Type Porcelain Insulator PW-33-Y type PW-33-Y DIMENSIONS Diameter of shell mm 220 Height mm 260 Creepage distance mm 1000 Net weight,approximate kg 10.8 Electrical performances Type application voltage kv 35 power frequency wet withstand voltage kv 85 power frequency dry withstand voltage kv 110 Critical impulse flashover voltage,positive kv 190 Critical impulse flashover voltage,negative kv 200 Low frequency puncture volt...
  • d iron and screws and 0.4KV ED-2C reel  insulation lv

    d iron and screws and 0.4KV ED-2C reel insulation lv

    Electrical Porcelain Insulator ED-2C with D-Iron from China Factory
    are used at the end of distribution lines or at sharp turns where there is excessive tensile load on the lines. These insulators can be mounted either in the vertical or horizontal position.
    Insulators are widely used devices, and their connecting fittings are also required to be interchangeable. In addition, the technical standards of butterfly insulators also require various electrical, mechanical, physical and environmental condition change tests on insulators according to different models and service conditions, as well as environmental condition change tests, so as to test their performance and quality.
  • d iron and screws and 0.4KV ED-2B reel  insulation lv

    d iron and screws and 0.4KV ED-2B reel insulation lv

    Electrical Porcelain Insulator ED-2B with D-Iron from China Factory
    are used at the end of distribution lines or at sharp turns where there is excessive tensile load on the lines. These insulators can be mounted either in the vertical or horizontal position.
    Insulators are widely used devices, and their connecting fittings are also required to be interchangeable. In addition, the technical standards of butterfly insulators also require various electrical, mechanical, physical and environmental condition change tests on insulators according to different models and service conditions, as well as environmental condition change tests, so as to test their performance and quality.